INFEED HOPPER KRM 1700

  • Main belt with a width of 170 cm and a length of 400 cm
  • 7 separator rollers; long of 190 cm
  • Adjustable gap between rollers 5-75 mm
  • Angle of the main belt 25 degrees
  • Capacity 10m³ 
  • Productivity 5-40 t/h
  • Length / width / height 570 x 350 x 260 cm
  • Weight 2000 kg
  • Installed power 6 kW / 12 A
  • Power supply 3x400 V+N+PE
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>
  • INFEED HOPPER <nobr>KRM 1700</nobr>

INFEED HOPPER KRM 1700

The compact KRM 1700 hopper is used for unloading trailers with rear tipping. Constructed on a stable welded steel frame with finishes made of profiled sheet metal. The machine is equipped with two pneumatic wheels and a detachable drawbar, enabling easy transport using a forklift or agricultural tractor. The main conveyor belt, 170 cm wide, along with profiled cleats measuring 16 mm in height, ensures high work efficiency.

Smooth speed adjustment of the working belt within the range of 0.5 - 4.5 m/min allows for adapting workload efficiency in subsequent machines along the technological line. The 10 m3 capacity tank is standardly equipped with 7 sifter rolls (190 cm in length), characterized by high wear resistance. Depending on the requirements, the rolls may be spiral rubber, spiral PU, smooth tubes, metal springs, or simple rubber rings with adjustable gaps. The hopper is equipped with two transverse belts (each 60 cm wide) for removing fine impurities and the desired product.



Basic equipment

  • Painted construction
  • Adjustable main belt speed in the range of 0,5-4,5 m/min
  • 7 separator rollers (constant speed)
  • Two transverse conveyors with the possibility of working in two directions (constant speed)
  • Electrically adjustable gap and separator angle

Optional equipment

  • Speed control of the separator (2 inverters)
  • Adjustment of the speed of the cross belt (1 unit)
  • Change of rollers to PU (7 rollers)
    *rolls also available: 
    smooth rollers (INOX), metal spiral rollers made of spring steel, rubber "diabolo" rollers
  • Lengthening of transverse belts
  • Descent damper for transverse belt (controlled by gas actuators)
  • Cover made of tarpaulin over the rollers
  • Remote control. START/STOP, control of the speed of the last used option.
Back