INFEED HOPPER KRM 2400-3T

  • Main belt with a width of 240 cm and a length of 650 cm
  • 150 cm main belt running horizontally
  • 7 sifter rolls with a width of 260 cm
  • 7 separator rollers with a width of 260 cm
  • Adjustable gap between rollers 5-75 mm
  • Angle of the main belt 30 degrees
  • Capacity 20m³ 
  • Productivity 10-60 t/h
  • Length / width / height 800 x 370 x 340 cm
  • Weight 4 000 kg
  • Installed power 14.5 kW / 29 A
  • Power supply 3x400 V+N+PE
  • INFEED HOPPER <nobr>KRM 2400-3T</nobr>
  • INFEED HOPPER <nobr>KRM 2400-3T</nobr>
  • INFEED HOPPER <nobr>KRM 2400-3T</nobr>
  • INFEED HOPPER <nobr>KRM 2400-3T</nobr>
  • INFEED HOPPER <nobr>KRM 2400-3T</nobr>
  • INFEED HOPPER <nobr>KRM 2400-3T</nobr>
  • INFEED HOPPER <nobr>KRM 2400-3T</nobr>

INFEED HOPPER KRM 2400-3T


KRM 2400-3T This machine is used for unloading trailers and semi-trailers with a rear tipper. It is constructed on a stable welded steel frame with profiled metal sheet finishing. The hopper has two pneumatic wheels and a detachable shaft for non-distant transport by means of a forklift or a tractor. 240 cm long main belt guarantees high efficiency without a risk of vegetables suspending. The infinitely variable belt adjustment in the range 0.4m-3.2 m / minute allows for adjusting the machine efficiency to other machines in a technological line. Screening and sorting rollers are 260 cm wide. In total there are 14 rollers: 7 screening rollers and 7 sorting rollers. Coiled rubber rollers. Possible infinitely variable adjustment of gaps.

Basic equipment


  • Painted construction
  • Adjustable main belt speed from 0.4-3.2 m/min
  • 7 sifter rollers ( constant speed)
  • 7 separator rollers (constant speed)
  • Three transverse conveyors with the possibility of working in two directions (constant speed)
  • Electro-hydraulic pump for adjusting gaps and inclination of rollers
  • Control remote control with 8-meter cable

Optional equipment

  • Sifter speed control (2 inverters)
  • Separator speed adjustment (2 inverters)
  • Cross belt speed adjustment (1 inverter)
  • Change of rollers to PU (14 rollers)
  • Descent damper for cross belt (controlled by gas actuators)
  • Cover made of tarpaulin over the rollers
Back