RECEIVING HOPPER SH-100

  • Productivity up to 10 t/h
  • Capacity 4m³/1500 kg
  • Dimensions:
    * length: 350 cm (without separator), 400 cm (with fixed separator)
    or 425 cm (with sliding separator)
    * width: 245 cm
    * height: 180 cm
  • Weight 950 kg
  • Installed power 3 kW / 6 A
  • Power supply 3x400 V+N+PE, plug 5x16A
  • RECEIVING HOPPER <nobr>SH-100</nobr>
  • RECEIVING HOPPER <nobr>SH-100</nobr>
  • RECEIVING HOPPER <nobr>SH-100</nobr>
  • RECEIVING HOPPER <nobr>SH-100</nobr>
  • RECEIVING HOPPER <nobr>SH-100</nobr>
  • RECEIVING HOPPER <nobr>SH-100</nobr>
  • RECEIVING HOPPER <nobr>SH-100</nobr>

RECEIVING HOPPER SH-100

The receiving hopper type SH provides a fast, gentle way of unloading agricultural produce. Designed for receiving goods from pallet boxes, rotated using a rotator mounted on a forklift or WHM-type tipper. Equipped with a durable Chevron rubber belt with a working width of 100 cm and takers with a height of 16 mm. The speed of the main belt can be controlled by an inverter. Additionally, the machine can be equipped with a 6-roller soil separator, driven by an independent motor (which can also be equipped with an inverter). As standard, the separator has a fixed roller spacing. Optionally, the SH basket may have an adjustable roller extension system ranging from 10-70 mm, in which case each roller has its own motor, and the speed can be controlled in two ways: either entirely using one inverter or alternately using 2 inverters. The angle of the separator can be mechanically adjusted in the basket. The height of the basket can be adjusted using telescopic legs, ranging from 95 to 125 cm (height at the hopper's belt outlet). This hopper is also available in a square version for use with the WHM hydraulic tipper, in which case the tipper can be positioned in any direction relative to the basket: on one of the sides or straight ahead. The internal side walls of the receiving basket can be lined with rubber or foam, providing additional protection for the vegetables during unloading.

Basic equipment

  • Construction painted RAL 7024 + galvanized sheets
  • Chevron type rubber belt with a width of 100 cm 16 mm takers
  • Wired remote control (4m cable)
  • Constant main belt speed approx. 9,5 m/min

Optional equipment

  • Stainless steel construction
  • Speed adjustment of the main belt (1 inverter)
  • Additional 1/3 reduction gearbox
  • Separator for SH 100 --6 rollers
  • Inverter for all separator rollers (main belt inverter option required)
  • Extendable roller separator system for SH 100
  • 2 inverters for rollers 1,3,5 and 2,4,6 (main belt inverter option required)
  • Changing separator rollers to PU spirals
  • Lining the inside of the basket with rubber or foam
  • Photocell
  • Low square basket (if compatible with WHM-700)
  • High square basket (in compatible with WHM-1500)
  • 20 cm extensions
  • Ultrasonic sensor measuring layer thickness (main belt speed control)
  • Height increase for basket from 50 to 100 cm
  • Remote control
Back