INFEED HOPPER KRM 1200-3T

  • Main belt with a width of 120 cm and a length of 400 cm
  • 7 sifter rolls with a width of 140 cm
  • 7 rolls of separator with a width of 140 cm
  • Adjustable gap between rollers 5-75 mm
  • Angle of the main belt 25 degrees
  • Capacity 8m³ 
  • Productivity 5-30 t/h
  • L/W/H 650 x 290 x 260 cm
  • Weight 2000 kg
  • Installed power 8,5kW/17A
  • Power supply 3x400V+N+PE
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>

INFEED HOPPER KRM 1200-3T


KRM 1200-3T This machine is used for unloading trailers with a rear tipper. It is constructed on a stable welded steel frame with profiled metal sheet finishing. The hopper has two pneumatic wheels and a detachable shaft for non-distant transport by means of a forklift or a tractor. Main rubber belt width 120 cm/170 cm with dogs. Infinitely variable belt adjustment in the range 0.5 m-4.5 m/minute allows for adjusting the machine efficiency to other machines in a technological line. Containers have 7 screening rollers (in 3-belt versions – they have additional 7 sorting rollers). Screening and sorting rollers with the width of 190 cm in standard coil rubber or PU rollers with possible infinitely invariable gap adjustment.

Basic equipment


  • Painted construction
  • Adjustable main belt speed in the range of 0.5-4.5 m/min
  • 7 sifter rollers (constant speed)
  • Three transverse conveyors with the possibility of working in two directions (constant speed)
  • Electrically adjustable gap and separator angle

Optional equipment

  • Speed control of sifter (2 inverters)
  • Separator speed control (2 inverters)
  • Cross belt speed adjustment (1 inverter)
  • Change of rollers to PU (7 rollers)
  • Change of rollers to PU (14 rollers)
  • Lengthening of transverse belts
  • Descent damper for transverse belt (controlled by gas actuators)
  • Cover made of tarpaulin over the rollers
Back