INFEED HOPPER KRM 1200-3T

  • Main belt with a width of 120 cm and a length of 400 cm
  • 7 sifter rolls with a width of 140 cm
  • 7 rolls of separator with a width of 140 cm
  • Adjustable gap between rollers 5-75 mm
  • Angle of the main belt 25 degrees
  • Capacity 8m³ 
  • Productivity 5-30 t/h
  • L/W/H 650 x 290 x 260 cm
  • Weight 2000 kg
  • Installed power 8,5kW/17A
  • Power supply 3x400V+N+PE
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>
  • INFEED HOPPER <nobr>KRM 1200-3T</nobr>

INFEED HOPPER KRM 1200-3T

The compact KRM 1200-3T hopper is used for unloading trailers with rear tipping. Constructed on a stable, welded steel frame with finishes made of profiled sheet metal. The machine is equipped with two pneumatic wheels and a detachable drawbar, enabling easy transport using a forklift or agricultural tractor. Its solid and durable main conveyor belt, 120 cm wide, along with profiled cleats measuring 16 mm in height, ensures high work efficiency. Smooth speed adjustment of the working belt within the range of 0.5 - 4.5 m/min allows for adapting workload efficiency in subsequent machines along the technological line. The 8 m3 capacity tank is equipped with a set of 7 sifter rolls and 7 sorting rollers characterized by high wear resistance. Depending on the requirements, the rolls may be spiral rubber, spiral PU, smooth tubes, metal springs, or simple rubber rings with adjustable gaps. The hopper is equipped with three transverse belts (each 60 cm wide) for removing fine impurities and the desired product.

Basic equipment

  • Painted construction
  • Adjustable main belt speed in the range of 0.5-4.5 m/min
  • 7 sifter rollers (constant speed)
  • 7 rolls of separator (constant speed)
  • Three cross conveyors with the possibility of working in two directions (constant speed)
  • Electrically adjustable gap and separator angle

Optional equipment

  • Speed control of sifter (2 inverters)
  • Separator speed control (2 inverters)
  • Cross belt speed adjustment (1 inverter)
  • Change of rollers to PU (7 rollers)
  • Change of rollers to PU (14 rollers)
  • Lengthening of transverse belts
  • Descent damper for transverse belt (controlled by gas actuators)
  • Cover made of tarpaulin over the rollers
  • Remote control. START/STOP, control of the speed of the last used option.
Back