RECEIVING HOPPER SH-65

  • Productivity up to 5 t/h
  • Capacity 3m³/1000 kg
  • L/W/H 420x210x170 cm
  • Weight 750 kg
  • Installed power 2.5 kW / 5 A
  • Power supply 3x400 V+N+PE, plug 5x16A
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>

RECEIVING HOPPER SH-65

The SH receiving hopper provides a fast, gentle way to unload agricultural produce. Designed to receive goods from pallet boxes, rotated using a turntable mounted on a forklift truck or a WHM-type tipper. Equipped with a durable rubber Chevron belt, 65 cm wide, with 16 mm high carriers. The main belt speed can be adjusted by an inverter. Additionally, the machine can be equipped with a 6-roller soil separator, driven by an independent motor (which can also be equipped with an inverter). As standard, the separator has a fixed roller spacing. Optionally, the SH bin can have an adjustable roller extension system ranging from 10-70 mm, in which case each roller has its own motor, and the speed can be adjusted in two ways: collectively using one inverter or alternately using two inverters. The bin allows for mechanical adjustment of the separator angle. The height of the bin can be adjusted using telescopic legs, ranging from 95 to 125 cm (height at the belt outlet from the bin). This bin also comes in a square version for use with a WHM-type tipper, allowing the tipper to be positioned in any direction relative to the bin: from one of the sides or straight ahead. The inner side walls of the receiving bin can be lined with rubber or foam, providing additional protection for vegetables during unloading.

Basic equipment

  • Structure painted RAL 7024 + galvanized sheets
  • Chevron type rubber belt with a width of 65 cm 16mm takers
  • Wired remote control (4m cable)
  • Constant main belt speed

Optional equipment

  • INOX construction (stainless steel construction)
  • Main belt speed adjustment (1 inverter)
  • Additional reduction gear 1/3
  • Separator for SH 65 --6 rollers
  • 1 inverter for all separator rollers (belt inverter option required)
  • Extendable separator roller system for SH 65 
  • 2 inverters for separator rollers 1,3,5 and 2,4,6 (main belt inverter option required) 
  • Changing separator rollers to PU spirals in SH 
  • Changing rollers to stars (3 or 6 rollers) 
  • Lining the inside of the conteiner with rubber or foam
  • Photocell 
  • Low square tank (if compatible with WHM-700) 
  • High square tank (if compatible with WHM-1500)
  • Remote control
  • Ultrasonic sensor measuring layer thickness (main belt speed control)
Back