RECEIVING HOPPER SH-65

  • Productivity up to 5 t/h
  • Capacity 3m³/1000 kg
  • L/W/H 420x210x170 cm
  • Weight 750 kg
  • Installed power 2.5 kW / 5 A
  • Power supply 3x400 V+N+PE, plug 5x16A
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>
  • RECEIVING HOPPER <nobr>SH-65</nobr>

RECEIVING HOPPER SH-65


The hopper is used to collect goods from crates rotated by a turntable mounted on a forklift, or in a square version to collect vegetables from a WHM 700 or WHM 1500 tipper. The hopper is equipped with a strong chevron-type belt with a width of 65 cm and a height of the takers of 16 mm. As an option, it is possible to purchase an inverter for adjusting the belt of the hopper, as well as a 6-roller soil separator driven by an independent motor (which can also be equipped with an inverter). The soil separator in the standard equipment has a fixed spacing, and as an option it can be adjusted in the range of 10-70 mm, in which case each roller has its own motor and the speed can be adjusted in 2 ways: the whole by one inverter, or alternate rollers by 2 inverters. It is possible to mechanically adjust the angle of the separator in the basket. The height of the basket can be adjusted by means of extendable legs, in the range from 95 to 125 cm (the height at the exit of the belt from the hopper). The hopper is also available in a square version, adapted to receive products from the WHM tipper, so that it is possible to place the tipper in any direction in relation to the hopper: from one of the sides or straight ahead.

Basic equipment


  • Structure painted RAL 7024 + galvanized sheets
  • Schewron type rubber belt with a width of 65 cm 16mm takers
  • Wired remote control (4m cable)
  • Constant main belt speed

Optional equipment

  • INOX construction
  • Main belt speed adjustment in SH
  • Additional reduction gear 1/3
  • Separator for SH 65 --6 rollers
  • 1 inverter for all separator rollers (belt inverter option required)
  • Extendable separator roller system for SH 65
Back