RECEIVING HOPPER SH-40

  • Productivity up to 5 t/h
  • Capacity 2.5 m³/700 kg
  • Dimensions:
    * length: 350 cm (without separator), 400 cm (with fixed separator)
    or 425 cm (with sliding separator)
    * width: 185 cm
    * height: 180 cm
  • Weight 630 kg
  • Installed power 2.5 kW / 5 A
  • Power supply 3x400 V+N+PE, plug 5x16A
  • RECEIVING HOPPER <nobr>SH-40</nobr>
  • RECEIVING HOPPER <nobr>SH-40</nobr>
  • RECEIVING HOPPER <nobr>SH-40</nobr>
  • RECEIVING HOPPER <nobr>SH-40</nobr>
  • RECEIVING HOPPER <nobr>SH-40</nobr>
  • RECEIVING HOPPER <nobr>SH-40</nobr>
  • RECEIVING HOPPER <nobr>SH-40</nobr>
  • RECEIVING HOPPER <nobr>SH-40</nobr>

RECEIVING HOPPER SH-40

The SH hopper type is used to collect goods from pallet boxes rotated by a turntable mounted on a forklift truck, or in a square version to collect vegetables from a WHM 700 or WHM 1500 tipper. The hopper is equipped with a sturdy Chevron-type belt with a width of 40 cm and a height of the carriers of 16 mm. Optionally, an inverter can be purchased for adjusting the belt speed of the hopper, as well as a 6-roller ground separator driven by an independent motor (which can also be equipped with an inverter). The soil separator in the standard equipment has a constant spacing, and as an option, it can be adjusted in the range of 10-70 mm, in which case each roller has its own motor, and the speed can be adjusted in 2 ways: either collectively by one inverter or alternately by 2 inverters. The angle of the separator in the hopper can be mechanically adjusted. The height of the hopper can be adjusted by means of extendable legs, in the range from 95 to 125 cm (the height at the exit of the belt from the hopper). The hopper is also available in a square version, adapted to receive products from the WHM tipper, allowing the tipper to be placed in any direction in relation to the hopper: from one of the sides or straight ahead.

Basic equipment

  • Structure painted RAL 7024 + galvanized sheets
  • Chevron type rubber belt with a width of 40cm, 16mm takers
  • Wired remote control (4m cable)
  • Constant main belt speed approx. 9.5m/min

Optional equipment

  • INOX construction (stainless steel construction)
  • Main belt speed adjustment (1 inverter)
  • Additional 1/3 slowing down gearbox
  • Separator for SH40 --6 rollers
  • 1 Inverter for all separator rollers (Main belt inverter option required)
  • Sliding roller system for SH 40 separator
  • 2 inverters for separator rollers 1,3,5 and 2,4,6 (main belt inverter option required)
  • Changing separator rollers to PU spirals in SH
  • Changing rollers to stars (3 or 6 rollers)
  • Lining the inside of the conteiner with rubber or foam (not rubber)
  • Photocell
  • Low square bin (if compatible with WHM-700)
  • High square bin (if compatible with WHM-1500)
  • Ultrasonic sensor measuring layer thickness (main belt speed control)
  • Remote control
Back